| Power |
Diameter |
Impedence |
|
1000
watts
|
21" - 53.34 cms
|
4, 8 or 16
ohms |
 |
Heavy duty 21” cast aluminium frame with extra wide flange for increased rigidity |
 |
 |
Sub Woofer |
 |
 |
Field replaceable magnet for touring applications |
 |
 |
1000Wrms |
 |
 |
6” copper voice coil assembly |
 |
 |
Neodymium magnet |
 |
 |
Power compression 2dB at rated power *1 |
 |
 |
Distortion *2 2nd Harmonic <1% |
 |
 |
3rd Harmonic <1% |
 |
 |
Advanced magnetic assembly incorporating a composite alloy and steel pole piece giving a uniform and stable magnetic field, improving linear excursion and providing an efficient thermal path to dissipate the heat produced by the voice coil |
 |
 |
A B/L in excess of 34 T/m for fast accurate lows |
 |
 |
Double suspension system maintaining a pure piston action for the moving mass even when driven with the most complex programme input signals and provides additional durability against the rigours of life on the road |
 |
|
|
| Description: |
 |
The PDN.2151 is a unique high power, high efficiency cone transducer designed specifically to provide powerful and accurate sub bass frequencies with minimal distortion and power compression. Delivers faultless low end performance in applications in which others fall by the wayside.
Perfectly at home in new or refurbished horn loaded sub bass systems this unit also delivers powerful lows in reflex designs. An outstanding drive unit since it allows designers considerably more freedom with enclosure design and specialised loading techniques without having to allow for physical characteristics or power handling limitations which are typically the result of more traditional designs.
*1 Power compression is the reduction of sensitivity at the specified power. Higher power ratings do not necessarily give a proportionate increase in SPL, therefore the maximum SPL of the PDN.2151 may significantly exceed that of other manufacturers with high published power ratings.
*2 Distortion is measured at 10% of the rated power (AES Standard). |
|
|
 |
 |
| PDN.2151 Neodymium Technical Information |
 |
| Nominal Diameter |
53cm (21") |
| Power Rating |
1000 Watts |
| Frequency Range |
30-100 Hz |
| Nominal Impedance |
4,8,16 Ohms |
| Sensitivity (1W 1M) |
99dB |
| Highest Recommended Crossover |
300 Hz |
| Resonance |
31 Hz |
| Enc. Vol. Recommended |
130 to 350 Litres |
| Effective Piston Diameter |
455mm (18.2") |
| Displacement Limit (peak-peak) |
38mm (1.5") |
| Voice Coil Diameter |
152mm (6.08") |
| Voice Coil |
Copper |
| Voice Coil Winding Height |
30mm (1.2") |
| Voice Coil Wire Length |
56.6m (186') |
| Magnetic Gap Depth |
15mm (0.59") |
| Magnet Material |
Neodymium |
| Flux Density |
1.1T |
| Cone / Surround |
Paper / Fabric |
 |
| Thiele-Small Parameters |
 |
| Fs |
27 Hz |
| Revc |
5.4 Ohms |
| Qts |
0.18 |
| Qms |
4.723 |
| Vas |
474.8 Litres |
| Qes |
0.187 |
| Mms |
281 grams |
| Sd |
1688 cm2 |
| Cms |
0.119 mm/n |
| BL |
37.13 Tm |
| Xmax |
10.5 mm |
| Vd |
1.76 Litres |
| No |
4.81 % |
| Pmx |
1000 Watts |
|